EasyManua.ls Logo

Current Solutions InTENSity Twin Stim III - Electrode Cord Care and Maintenance

Current Solutions InTENSity Twin Stim III
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TENSPros
Caution:
Do not pull on the electrode wire. Doing so may damage
the wire and electrode.
Do not apply to broken skin.
The electrodes should be discarded when they are no
longer adhering.
The electrodes are intended for single patient use only.
If irritation occurs, discontinue use and consult your
clinician.
Read the instructions for use of self-adhesive electrodes
before application.
Always use the electrodes with the requirements of the
IEC/EN60601-1, ISO10993-1/-5/-10 and IEC/ EN60601-1-2,
such as with CE mark, or are legally marketed in the US
under 510(K) procedure.
6.4 Cleaning the Electrode's cords
Clean the electrode cords by wiping them with a damp cloth.
Coating them lightly with talcum powder will reduce tangles and
prolong the life.
6.5 Maintenance
31
1)
2)
3)
4)
5)
6)
7)