WWW.CURRENT-USA.COM
7
Problem
Feeder does not work.
Displays shows but the feeder
does not feed.
Feeder was dropped in water.
To Correct
Check the display. If there is nothing
on the display then replace batteries and
recheck.
Check and replace the batteries. If this
does not help, check to see if the rotor is
blocked by food clogged from moisture.
Disassemble lid, main body, timer cover
and batteries. Allow feeder to dry for 2-3
days. Place new batteries in feeder. If
feeder still does not work, contact your
dealer.
Note: If feeder has been dropped into
the water, warranty is void.
troubleshooting
To Next Page
Loading...
Need help?
General