8 9
C. Set up with google home
Once the Current Products Corp. Bridge has been setup with the MyCurtains
app and all devices have been added, you can connect the system to Google
Home for voice control.
1. Set up Google Home and CPC Bridge
If your Google Home device is not yet set up, do so now by following the
instructions that came with your Google Home.
Also be sure the bridge and app have been setup. For instructions on how to
set up your bridge and MyCurtains app, see page 3.
2. Set up Device
Open the Google Home app on your smart device and navigate to the correct
“home” (some users may have multiple homes connected to one account).
Press the “Add” button, then “Set Up Device”, then “Works with Google”. Use
the search function to locate “Current Products Drapery” [Fig. C1-C4].
Figure C1; Open App and hit Add Figure C2; “Set Up Device”
Figure C3; “Works with Google”
Figure C4; Search for Current
Products Corp. Find and Select
Service
Home
To Next Page
Loading...
Need help?
General
