Current eFlux DC User Manual

IMPORTANT: Please refer to additional safety warnings on last page.
- Keep out of reach children. Do not allow children to play with pump, pump Manifold or power supply.
- Never run flow pump dry or out of water, do NOT run dry.
- Do not submerse more than 1.5M/4 ft. of water depth.
- Always unplug with dry hands for any maintenance or service.
- eFlux flow pumps are 24VDC. Ensure one 24VDC UL® transformer is used per wave pump.
- Ensure 24VDC UL® transformer is plugged into a GFCI approved outlet with a drip loop.
- Turn controller OFF and disconnect pump from power before performing any service.
- Ensure eFlux flow pumps and any accessories all have a drip loop installed before plugging into
the flow pump manifold HUB as shown below.
- Only use in freshwater or saltwater applications, do not use pumps in other liquids.
SAVE THESE INSTRUCTIONS
AC Power
GFCI Outlet
24VDC
Power Supply
DC Flow Pump
Manifold HUB
eFlux DC
Flow Pump
Ensure use of drip
loop for all cables
Use only with GFCI
Protected AC Outlet
Ensure correct voltage power
supply for each component
om
Safety Instructions & Warnings 1
What’s Included & Installation 2
eFlux DC Flow Pump Installation 3
Warranty & Safety Warnings
5
Thank You!
For purchasing our eFlux Flow pump.
Please read all instructions before
getting in the LOOP!
eFlux DC Flow Pump
Safety Instructions & Warnings
Table of Contents
Page 1
- Do not exceed maximum head pressure or height specification.
- ALWAYS follow sump and tank/overflow manufacturer instructions regarding check valves

Current eFlux DC Specifications

General

Brand	Current
Model	eFlux DC
Category	Water Pump
Language	English

Summary

Safety Instructions & Warnings

General Safety Precautions

Essential safety guidelines for operating the eFlux DC Flow Pump, including handling and environmental considerations.

Product Overview and Specifications

Included Components

List of all items included in the eFlux DC Flow Pump package, detailing each component.

Pump Performance Specifications

Details on flow rate, head pressure, wattage, voltage, and outlet sizes for different pump models.

Pump Installation Guide

Submersible (Internal) Installation

Step-by-step instructions for installing the pump internally within an aquarium or sump.

Inline (External) Installation

Step-by-step instructions for installing the pump externally in an aquarium plumbing system.

Manifold HUB Mounting

Instructions for properly mounting the eFlux Flow Pump Manifold HUB bracket and HUB.

System Connection and Maintenance

Connecting Pump to Manifold HUB

Steps and diagrams for connecting the DC pump and power supply to the manifold HUB.

Routine Pump Maintenance

Procedure for cleaning and maintaining the pump components to ensure optimal performance.

Safety Warnings and Warranty

Additional Safety Precautions

Further critical safety warnings regarding electrical connections, water exposure, and product handling.

One Year Limited Warranty

Details of the Current-USA One Year Limited Warranty, terms, and conditions.