Current MP410 User Manual

(c)CURRENT,INC. www.crnt.co.jp  1
2-26-11 AKATSUTSUMI, SETAGAYA-KU, TOKYO, 156-0044 JAPAN TEL:81-3-3321-9559 FAX:81-3-5376-2735
The specifications are subject to change without notice.
CURRENT
MP410 MULTI HEADPHONE AMP
MAINS
010
HP LEVEL
HEADPHONES MONITOR
1
2
3456 78910
MAINS:100VAC 50/60Hz
DISCONNECT INPUT POWER BEFORE REPLACING FUSE
FUSE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
!
MODEL:MP410 SN_______
100VAC 50/60Hz, MAX25W
FUSE=250V 1A, IEC127 5x20mm
MADE IN JAPAN
CURRENT,INC.
PUSHPUSH
INPUT_L
THRU_L
INPUT_R
THRU_R
CURRENT PRODUCTS model:MP410
M U LT I H E A D P H O N E A M P
10 distribution headphone
Super high-quality sound
High power
XLR through out is with it
19 inches 1U size
MP410 is the multi headphones amp which is available in 10
simultaneously. It provides powerful, clear sound by using
circuit configuration identical to SC8016A of the CUE system
for recording studios where there is the reputation for
sound quality in the power amp section and parts.
"Line input"
The input of MP410 provides in the throughout with XLR connecter,
and the way of using inserting on the way of a line is possible.
"Monitor"
There are 10 headphone jacks to front panel and can monitor 10
people simultaneously. A headphone level is only a master level.
"Others"
Please refer about the manufacturing of the type that level control is
possible individually.
AUDIO INPUTS: BALANCED, 12kΩ
INPUTS CONNECTOR: XLR3-F
MAXIMUM INPUT LEVEL: +24dBu
CONTROL: HEADPHONES LEVEL
HEADPHONES OUTPUT: 10
FREQUENCY RESPONSE: 20~20kHz, ±0.1dB
THD: < 0.01%
NOISE: < -90dBu
MAXIMUM OUTPUT: 2.5W at 50Ω
CONTROL: HP(MASTER) ,EXT MIX 1,2 LEVEL
MAINS: 100VAC 50/60Hz MAX 25W
DIMENSIONS: 482W x 44H x 303D 4kg
Headphones amp MP410 ¥248,000
accessory : AC cable
S P E C I F I C A T I O N S

Current MP410 Specifications

General

Brand	Current
Model	MP410
Category	Amplifier
Language	English

Summary

Product Features

Line Input

Describes the XLR connector input for the MP410, allowing inline use on a line.

Monitor Function

Details the 10 headphone jacks for simultaneous monitoring with a single master level control.

Individual Level Control

Refers to the manufacturing aspect regarding individually controllable levels.

Specifications

Audio Inputs

BALANCED, 12kΩ audio inputs using XLR3-F connectors.

Maximum Input Level

Specifies the maximum input level as +24dBu.

Headphones Output

Details 10 headphone outputs with master level control.

Frequency Response

States the frequency response is 20~20kHz, ±0.1dB.

Distortion and Noise

Specifies THD < 0.01% and NOISE < -90dBu.

Maximum Output Power

Maximum output of 2.5W at 500Ω.

Mains Power

Requires 100VAC 50/60Hz, with a maximum consumption of 25W.

Dimensions and Weight

Dimensions: 482W x 44H x 303D, Weight: 4kg.

Panel Diagram

Front Panel

Illustration of the front panel controls including HP LEVEL and headphone monitor jacks.

Rear Panel

Illustration of the rear panel connections including INPUTS and THRU.