To Next PageTo Next Page
Need help?Do you have a question about the Current Prime Chiller 2604 and is the answer not in the manual?
Basic safety precautions and warnings for operating the chiller unit, including electrical hazards.
Mandatory connection to a GFCI outlet for protection against electric shock.
Steps for unpacking the chiller, inspecting for damage, and removing shipping materials.
Procedure for installing the temperature sensor into the chiller's evaporator housing.
Requirements for proper airflow, ventilation, and placement of the chiller unit.
Instructions for plumbing connections, water flow testing, and leak checks.
Technical details of the temperature controller, including operating range and sensor type.
Proper installation of the controller sensor and connecting power to a GFCI outlet.
Configuring display units (F/C), set points, and differentials for temperature control.
Setting the controller for cooling or heating modes and stage configurations.
Interpreting controller error messages and performing corrective actions.
Guidance on cleaning, inspecting fittings, and flushing the evaporator for optimal performance.
Table listing technical data for different Prime Chiller models.
Information regarding the product's limited warranty, terms, and coverage.
General