EasyManua.ls Logo

Currie tech EZIP e4.5 - Battery Charging

Currie tech EZIP e4.5
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
Plug the battery charger into a wall outlet, then into the charger port on the neck of the scooter. The indicator light on the
face of the charger will turn red, showing that charging has started. When charging is complete, the indicator light will turn
green. A full charge will take 4-6 hours, however if the battery is not empty charging may take much less time. Always
unplug the charger after use. Always store the scooter with the power switched turned OFF.
BATTERY CHARGING

Related product manuals