curt 18100 User Manual

CURTMFG.COM
•
PRODUCT SUPPORT: 877.287.8634
•
18100-INS-RA
•
04/16/2021
•
ECN8300
•
PAGE 1
Product Registration and Warranty
CURT stands behind our products with industry-leading warranties. To get copies of the product
warranties, register your purchase or provide feedback, visit: warranty.curtgroup.com/surveys
WARNING
Never exceed the vehicle manufacturer's recommended towing capacity.
Do not exceed maximum weight capacity of 500 lbs. when using 2" receiver tube.
Distribute the weight evenly on platform when hauling a load.
Do not carry loads taller, wider or deeper than the cargo carrier. Do not carry flammable items
on carrier or allow exhaust fumes to blow directly on your cargo. This is a fire hazard.
Always use caution when in reverse (R) to help avoid personal injury.
Loads must be evenly distributed.
Never use as a step or platform - injury may result.
Do not use to carry flammable items or allow exhaust
fumes to blow directly on items in the carrier – fire hazard.
Do not use to transport people.
Do not block brake lights or turn signals.
Weight Carrying Capacity
Weight capacity 500 lbs.
INSTALLATION MANUAL
18100
Tools Required
Wrench, 17mm Wrench, 24mm
Adjustable wrench --
Level of Difficulty
Easy
Installation difficulty levels are based on time
and effort involved and may vary depending on
the installer level of expertise, condition of the
vehicle and proper tools and equipment.
NOTICE
Visit www.curtmfg.com for a full-color copy of this
instruction manual, as well as helpful videos, guides and much more!
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
Periodic inspection of your product should be performed
to ensure all hardware and / or components remain secure.
Product Photo
Torque Specifications
M10 bolt 16 ft-lbs.
M16 bolt 70 ft-lbs.
Use above torque setting unless otherwise noted
Parts List
Item Qty Description
1 2 Platform frame, half
2 1 Shank, 2"
3 2 Connecting plate
4 1 Folding shank assembly
5 1 Clip
6 1 Pin, 5/8"
7 1 Lock nut, M16
8 1 Hex bolt, M16 x 80mm
9 14 Lock nut, M10
10 8 Carriage bolt, M10 x 20mm
11 4 Carriage bolt, M10 x 30mm
12 2 Carriage bolt, M10 x 80mm
13 1 Flat brace
14 2 Support bridge
15 2 Brace

curt 18100 Specifications

General

Brand	curt
Model	18100
Category	Racks & Stands
Language	English

Summary

Level of Difficulty

Difficulty Explanation

Installation difficulty levels are based on time and effort involved and may vary depending on installer expertise and equipment.

Weight Carrying Capacity

Capacity Limit

Specifies the maximum weight capacity for the carrier, which is 500 lbs.

Safety Warnings

Maximum Capacity

Do not exceed vehicle manufacturer's towing capacity or 500 lbs. for the carrier.

Load Distribution

Distribute weight evenly and do not carry loads taller, wider, or deeper than the carrier.

Hazardous Materials

Do not carry flammable items or allow exhaust fumes to blow on cargo.

Operational Safety

Use caution in reverse, never use as a step, do not transport people, and do not block lights.

Torque Specifications

Bolt Torque Values

Specifies torque for M10 bolts (16 ft-lbs) and M16 bolts (70 ft-lbs).

Assembly Instructions

Step 1: Connect Platform Halves

Align platform halves with connecting plates using M10 bolts and lock nuts.

Step 2: Attach Shank and Braces

Position shank, support bridge, and flat brace, securing with M10 bolt and lock nut.

Step 3: Secure Support Bridge

Attach braces to support bridge using M10 x 30mm carriage bolts and lock nuts.

Step 4: Finalize Platform Connection

Connect platform halves using bottom holes with M10 x 20mm carriage bolts and lock nuts.

Step 5: Attach Shank Assembly

Insert shank into folding shank assembly, secure with M16 bolt and lock nut, use pin and clip.

Towing Basics & Safety Information

Safe Towing Guide

Information on safely towing your trailer is available at curtmfg.com.