Need help?Do you have a question about the Curtis Dyna-Fog Series 3 and is the answer not in the manual?
General| Brand | Curtis Dyna-Fog |
|---|---|
| Model | Series 3 |
| Category | Fog Machine |
| Language | English |
Technical specifications for Model 2620 Blackhawk, covering output, performance, and physical dimensions.
Technical specifications for Model 2630 Mister III, covering output, performance, and physical dimensions.
Welcome message and overview of the DYNA-FOG applicator's capabilities and care.
Overview of the fog generator's resonant pulse principle and intended use.
Explanation of the pulse jet engine's operational cycle and formulation delivery.
Essential safety warnings covering fuel handling, fogging hazards, fire risks, and operator responsibilities.
Steps to set up the machine and prepare it for the initial start.
Guidance on starting, stopping, and general operation of the pulse jet engine.
Detailed steps for starting a cold, hot, or flooded engine.
Guidance on choosing appropriate formulations for Models 2620 and 2630.
Procedures and considerations for effective insect control fogging.
Methods for determining correct fogging duration and volume for enclosed spaces.
Instructions and warnings for the process of dispensing fog from the machine.
Final steps to initiate the fogging process after the engine is running.
Procedure for flushing the formulation system with kerosene, fuel oil, or diesel fuel.
Tasks and intervals for maintaining the machine, including cleaning engine parts.
Procedures for adjusting idle needle, fuel needle, and metering lever for optimal performance.
Diagnosing problems with engine start-up, weak spark, and fuel delivery to the antechamber.
Identifying and resolving issues related to weak engine running, flooding, or failure to fog.
Illustrated list of replacement parts specific to the Model 2620 Blackhawk.
Illustrated list of replacement parts specific to the Model 2630 Mister III.
Illustrated list of parts common to both Model 2620 and 2630.
Guidelines for properly flushing, draining, and packaging the machine for storage or transport.
Information on available accessories like rechargeable batteries and drum attachment kits.
Table of common unit conversions for measurements used in the manual.
To Next Page
