Curtis CR4975 - CD Operation; Playing a CD

To play a disc from the beginning, press
the PLAY/PAUSE ( / ) button; the
PLAY/RAND indicator will light. Press
the PLAY/PAUSE ( / ) button again to
pause playback; the PLAY/RAND
indicator will blink. Press the
PLAY/PAUSE ( / ) button once again
to continue playback.
CD OPERATION
7
TO PLAY A CD
1
Slide the AUTO/OFF/ON switch to the
ON position to turn the unit on; the
POWER indicator will light.
2
Slide the FUNCTION switch to the CD
position.
3
Open the CD compartment door by
pressing the OPEN/CLOSE area. Insert
a disc, label side up, onto the spindle
and close the CD compartment door.
4
When the disc is through playing, it will
stop rotating. Press the STOP ( )
button to stop the disc before it is
finished.
5
Adjust the VOLUME control as desired.
6