1211
6. Press the PLAY button on the player face
(Depends on the DVD title, press
the ENTER button)
In general, the DVD already inserted
into the player will start reading
automatically when power is turned
on.
The DVD player will immediately
start rendering the DVD program.
When you want to stop, press the STOP button, it
will return to the logo. To power off the unit, slide the
ON/OFF switch to the OFF.
The DVD player will automatically power off in 20
minutes after entering screen saver mode. To reset
the unit, first slide power switch to ‘OFF’, and then
slide it to ‘ON’.
Quick Starting Guide
Remote Control
PREPARING THE REMOTE CONTROL
OPERATING WITH THE REMOTE CONTROL
Operating DVD video player with the
remote control.
The remote control must point at the
remote sensor, in order for the DVD
player to function correctly.
REMOTE SENSOR
1. Open the cassette cover.
.
Slide the cover in the direction of
the arrow 1.
2. place the battery into the
guide.
3. Insert the tray into the
remote control.
• When you place the battery into
the guide, make sure the polarity +
is faced up.
To Next Page
Loading...
