1211
6. Press the PLAY button on the
player face (Depends on the DVD
title, press the ENTER button)
In general, the DVD already inserted
into the player will start reading
automatically when power is turned
on.
The DVD player will immediately start rendering
the DVD program.
When you want to stop, press the STOP button, it
will return to the logo. To power off the unit, slide the
ON/OFF switch to the OFF.
The DVD player will automatically power off in 20
minutes after entering screen saver mode. To reset
the unit, first slide power switch to ‘OFF’, and then
slide it to ‘ON’.
Quick Starting Guide
Remote Control
PREPARING THE REMOTE CONTROL
1. Open the cassette cover.
.
Slide the cover in the direction of
the arrow 2 while folding down as
the arrow 1.
2. place the battery into the
guide.
3. Insert the tray into the
remote control.
• When you place the battery into
the guide, make sure the polarity +
is faced up.
2
1
OPERATING WITH THE REMOTE
CONTROL
Operating DVD video player with
the remote control.
The remote control must point at
the remote sensor, in order for
the DVD player to function
correctly.
To Next Page
Loading...
