15 of 23
CAB FEATURES & OPERATION
AIR CONDITIONING OPERATION
Turn the 4-position ventilation switch to activate the
blower. This can be used as just a blower with the A/C
compressor turned off.
Rotate the A/C switch to the desired temperature
setting to turn the compressor on/off.
In order for the A/C compressor to function, the vehicle
throttle must be set at full speed.
The blower must be turned on in order for the A/C
compressor to function.
AIR FILTER CHECK
Remove the four thumbscrews and washers then
remove the headrest mount from the rear frame.
Remove the two thumbscrews on the face of the A/C
and slide the drawer out to access the air filter.
Change the filter as needed based on operating
conditions.
A/C Controls
Air Filter Access
Thumbscrews
Set Blower Speed
Set Temperature
To Next Page
Loading...