Curtis Kubota ZD1211 - User Manual

1 of 35
INSTALLATION & OWNER
’S MANUAL
Kubota ZD1211
(p/n: 1KUBZD1211PR2)
Cab with A/C
(fits both 60” and 72” mowers)
(Does not fit with bagger system)
Rev. B, 07/06/2023
p/n: IM-1KUBZD1211PR2
While this cab kit was designed to fit on the vehicle listed above, manufacturing tolerances
and vehicle assembly may affect cab fitment. It is the responsibility of the cab installer to
check all vehicle pedals and levers for full functionality and, as required, adjust the cab
fitment to prevent any interference of the cab components with the travel of pedals or levers.
(*=Not including accessories)
Available Options:
1. Side View Mirrors (P/N: 9PM5)
2. Switch Panel (P/N: 1KUBZD1211CK) (req’d for following 2 items)
3. Front LED Work Lights (P/N: 1KUBZD1211LK)
4. Front Wiper/Washer Kit (P/N: 1KUBZD1211WK)
Approximate Installation Time *
Experienced Dealer Technician – 4 Hours
Average Dealer Technician – 6 Hours
Do-It-Yourself – 6-8 Hours
Approximate Product Specifications
Floorboard to Roof Height: 60 inches
Weight: 240 lbs.
Cab Width: 54 inches
The contents of this envelope are the property of the owner. Leave with the owner when installation is complete.
Register your new product quickly online at
Curtiscab.com/product-registration/
Download a digital copy of your installation
instructions online at Curtiscab.com/literature/
Curtis encourages all customers to register their
Curtis products. However, failure to do so will not
diminish right to warranty. Curtis Industries does not
sell or share your information with anyone else.
Curtis strives to continuously improve our products,
technical documentation, etc. Therefore, the
installation manual for this product may have been
updated after your product was packaged. The
latest revision of the installation manual can always
be found at the website above.
Premium Cab Shown with Options

Curtis Kubota ZD1211 Specifications

General

Fuel Type	Diesel
Cutting Height Range	1 - 5 inches
Transmission Type	Hydrostatic
Drive Type	2WD
Engine	Kubota Diesel

Summary

Safety, Tips, and Tools for Installation

General Information Before Installation

Provides pre-installation guidance and helpful tips for a successful cab setup.

Required Tools for Cab Installation

Lists all essential tools needed to perform the cab installation procedure.

Kubota Tractor Cab Installation Guide

Step 1: Vehicle Preparation

Initial steps to prepare the tractor, including disconnecting the battery and removing components.

Step 2: Dynamo Installation

Procedure for removing the old dynamo and installing the new dynamo and bracket assembly.

Step 3: ROPS Mount Installation

Instructions for mounting the Roll-Over Protective Structure (ROPS) components to the tractor.

Step 4: Floorboard and Seat Preparation

Modifying the floorboard and preparing the seat area for cab installation.

Step 5: Cabin Mounting and Securing

Detailed steps for lifting, positioning, and fastening the cab unit to the tractor frame.

Step 6: A;C Compressor Installation

Mounting the air conditioning compressor, its belt, and related hardware.

Step 7: Wiring and Electrical Connections

Connecting the dynamo, regulator, and A/C system wiring harnesses.

Step 8: Functionality Testing

Testing all installed systems, including the A/C and electrical components.

Step 9: Shroud Installation

Assembling and installing protective shroud panels around the compressor and dynamo.

Step 10: Filler Panel Installation

Installing underseat and drive handle filler panels to complete the cab's interior fitment.

Step 11: Final Installation and Checks

Re-installing doors, shocks, and covers, plus sealing any remaining gaps.

Cab Features and Operation

Removable Front Window Operation

Procedure for removing the front window to allow for axle clearance during operation.

Air Conditioning System Usage

Guide on operating the A/C system, including blower speed and temperature control.

A;C Air Filter Maintenance

Instructions for accessing and checking the A/C air filter for proper function.

Cab Care and Maintenance

Troubleshooting Common Issues

Belt Adjustment and Dynamo Service

V-Belt Adjustment Sequence

Step-by-step guide for adjusting or replacing the dynamo and compressor V-belts.

Service Parts Reference

Additional Service Parts List

List of miscellaneous hardware, fasteners, and specialized components for service.

Bolt Torque Specifications