OPERATING INSTRUCTIONS OI4
Brewing Instructions
G4TB/G4STB, OPERATING INSTRUCTIONS 080416NC
2 Remove/open the lid from
an empty tea dispenser and
position it on the brew deck.
Center it under the brew
basket.
TEA
DISPENSER
3 *OTFSUBDMFBOQBQFSmMUFSJOUP
the brew basket. Fill with the
proper amount of leaf tea.
-FWFMUIFUFBJOUIFmMUFS
4 4MJEFUIFmMMFECSFXCBTLFU
into the brew rails under the
control panel. Slide it all the
way back until it stops.
5 )PMEZPVSmOHFSPOUIF
appropriate brew icon. As
soon as you hear the click
of the brew valve, lift your
mOHFS#SFXJOHXJMMCFHJO
5IFCSFXFSXJMMCSFXDPGGFFPSUFBCBTFEPOUIFTFUUJOHTQSPHSBNNFEJOUPUIFVOJWFSTBMDPOUSPMNPEVMF6$.5P
DIBOHFUIFTFUUJOHTTFFUIFPROGRAMMING GUIDE.
1 The brewer should be ON.
$POmSNUIJTBUUIFSFBSUPHHMF
switch. “Ready to brew”
should be on the display.
6 If a keypad appears on
the display, the brew code
GFBUVSFJTFOBCMFEEFGBVMU
JTPGGBrewing will start
immediately after you enter
the brew code. See the
PROGRAMMING GUIDE to set
up/disable the brew code.
WARNING - TO AVOID SCALDING, AVOID SPLASHING. ,FFQ CPEZ QBSUT DMFBS PG UIF CSFXFS EVSJOH
CSFXJOH%POPUSFNPWFUIFCSFXCBTLFUXIJMFi#SFXJOHwBQQFBSTPOUIFEJTQMBZ
WARNING - %0/05SFGSJHFSBUFVOVTFEUFBPWFSOJHIUGPSMBUFSDPOTVNQUJPO
The G4 Tea Brewer is factory preset for optimal performance.