Curtis Gemini User Manual

To ensure the highest quality, best tasting coffee, your Gemini
Satellite brewer must be cleaned daily after the last batch.
Regular cleaning and preventive maintenance is essential in
keeping your coffee brewer looking and working like new.
CAUTION – Do not use cleansers, bleach liquids, powders or any
other substance containing chlorine. These products promote
corrosion and will pit the stainless steel. USE OF THESE PROD-
UCTS WILL VOID THE WARRANTY.
3. Slide the brewcone out and clean it. Thoroughly soap the
sprayhead area with a mild detergent solution.
4. Rinse and dry the brewcone and sprayhead area.
5. Drain drip trays of coffee. Wash the tray and screen with a
mild detergent solution.
6. Dry the tray.
7. Turn on the unit at the front control panel.
WARNING – Hot Surfaces. Avoid injury, allow the warmer deck to
cool before cleaning.
1. Turn off unit at the power
switch, behind the unit. Allow
the brewer to cool.
2. Wipe exterior surfaces with a
damp cloth, removing spills
and debris.
DAILY CLEANING INSTRUCTIONS
Cleaning the Curtis Gemini Satellite
Brewer.…
GEMINI SYSTEMS – CLEANING INSTRUCTIONS

Curtis Gemini Specifications

General

Brand	Curtis
Model	Gemini
Category	Coffee Maker
Language	English

Summary

Daily Cleaning Instructions

Turn off and cool unit

Power off unit and allow brewer to cool before proceeding with cleaning.

Wipe exterior surfaces

Clean exterior surfaces with a damp cloth to remove spills and debris.

Clean brewcone and sprayhead

Slide out brewcone, clean it, and soap the sprayhead area with mild detergent.

Rinse and dry brewcone

Rinse and dry the brewcone and sprayhead area thoroughly.

Drain and wash drip trays

Drain and wash drip trays and screens with a mild detergent solution.

Dry drip trays

Dry the cleaned drip trays.

Turn on unit

Turn the unit back on using the front control panel.

Weekly Cleaning Instructions

Turn off and cool brewer

Turn off the unit and allow the brewer to cool before starting weekly cleaning.

Clean sprayhead and rails

Remove sprayhead, clean it, surrounding area, and brewcone rails with detergent.

Reattach sprayhead

Reattach the sprayhead after completing the cleaning process.

Disassemble faucet handle

Twist faucet handle counter-clockwise to remove and disassemble parts from the faucet.

Clean seat cup

Clean the seat cup, inspect for damage, and dry all parts before reassembly.

Clean gauge glass assembly

Clean gauge glass tube and washers using a brush and mild detergent after disassembly.

Dry and assemble parts

Dry all cleaned parts and reassemble them correctly.

Clean inside Satellite brewer

Clean the inside of the Satellite brewer with a cloth or pad using mild detergent.

Turn on unit

Turn the unit on at the power switch located behind the unit.