Curtis KCR2609 - CD PLAYLIST FUNCTIONS; Setting up a CD playlist

O P E R A T ING INS T R UC T IO NS
10
To set up a CD playlist:
1. Press the POWER Button to turn on your radio, then Press the FUNCTION
 Button one or more times until "--" appears on the display.
2. Insert a CD into the CD tray. If the CD starts playing, press the STOP Button.
3.  Press the MEM/CLK SET Button. "PROG 0" appears on the display.
4. Press one of the SKIP/TUNING Buttons one or more times to select the first
 track you want to program.
5. Press the MEM/CLK SET Button to confirm your selection.
6. Repeat Step 4 and 5 to add more tracks to your playlist.
7. Maximum can store up to 20 tracks.
8. When you have finished creating your playlist, press the PLAY/PAUSE
 Button to start playing your playlist.
To edit a CD playlist:
1. While the CD is playing, press the STOP Button to stop playback.
2. Press the MEM/CLK SET Button to select one of the programmed tracks.
3. Press one of the SKIP/TUNING Buttons one or more times to select a new
 track you want to program.
4. Repeat Steps 2 and 3 to edit aditional track selections.
To cancel a playlist:
While the CD is playing, do one of the following:
 * Press the STOP Button twice.
 * Press the FUNCTION Button.
 * Press the OPEN/CLOSE Button to open the CD tray.
 * Press the POWER Button to turn off your radio.
To repeat a track or an entire CD:
1. Press the POWER Button to turn on your radio.
2. Press the FUNCTION Button one or more times until "--" appears on
 the display.
3. Press the OPEN/CLOSE Button to open the CD tray.
4. Place a CD with the label side up in the tracy, then press the OPEN/CLOSE
 button to close the tray.
5. Press the PLAY/PAUSE Button to start playback.