Remove all objects from pockets such
Eusure that the fan is switched off from
the supply mains before removing the guard.
as lighters and matches.
Clothing
s type
Quick-drying！Clothes
Cotton！clothes, jeans
Crease Guard
Max
dry time
50min
50min
60℃
55℃
40℃
Program
1Hour
Smart
Extra
Max volume of
dry clothings
Heat
cotton！weaving！clothes,
jeans！and！bedsheets
1
60min
1 Power Supply Key
2 Program Selection Key
3 Temperature Selection Key
4 Start/pause key
5 Program Indicator
6 Temperature Indicator
1) Press the "power" button to turn on (off) the power supply;
2) Programming. Users can select the program according to the clothing material and clothing
quantity, click the "Program Selection" button, and switch the program between "Extra","smart"
and "One Hour".
3) Selection of heating temperature. When using the "timing" program, the heating temperature
can be set in the three options of "60", "40" and "air-drying". When the selection is successful,
the corresponding temperature indicator lights up.
4) Press the "Start/Stop" button, and the dryer will start working after 2 seconds. Pressing this
button during operation can stop working. Clothes can be added or reduced in this state, and
hot steam will come out carefully when opening the door, so as to avoid scalding. Press the
machine again to resume operation and continue to complete the selection process. The
"Start/Stop" key is the switch between start and stop of dryer. If you press the "Start/Stop"
button directly after turning on the power supply, the dryer will run according to the intelligent
program.
8.8~13.2 lbs
2.2~13.2 lbs
4.4 lbs
1
60℃
Airing
To Next Page
Loading...