Cuttermasters Professional JXT - Page 11

www.cuttermasters.com - Toll Free (800) 417 2171
CUTTERMASTER Professional JXT User’s Manual
Page 11
1.5 Grinding Wheels
The Machine has been designed for a variety of wheels and wheel
mounts.Withthemachinethereareseveralspacerstotthe1.25”
hubs. These are to be used to space the wheels out to best ac-
commodate reach and adjust wheel approach. Most of our wheels
are available in CBN (for High Speed Steel Tools) and diamond
(for carbide tools).
Typical Wheels used are 1A1 and Taper Cup and Flared Cup
11V9C.Wealsohavespecialtywheelsforsetscrewats,rough-
ers,cuto󰀨,rads,necksandmore.oralistofourrecommended
industrial grinding wheels or to contact us about grinding wheels
visit
https://cuttermasters.com/product-category/grinding-wheels/
The variable speed high torque motor allows for much deeper cuts
can be accomplished while minimizing heat. We have designed
wheelsspecicallyforthispurpose.Alwaysusegoodwheelsand
inspect them before each use.
Flared Cup Wheel
11V9C
Flared Cup 11V9C Shoulder/Neck 1A1 Micro Neck ProledRadius Fluting CutO󰀨 Face Chamfer Annular Cutter
Ends
P P
Flutes (O.D.)
P
End Gash
P P
Corner Rad (Bull and Ball)
P
Gumming Inside Flutes
P P P
Neck Reduction
P P P P
Micro Neck Reduction
P P P
Weldon Set Screw Flats
P
T-Cutter
P
Reamers
P P P P
Countersinks
P
Taps
P P
Drills
P
Annular Cutters
P
Chamfer Mills
P
Corner Prep
P
CarbideCutO󰀨
P
Grinding Wheel Type
Grinding Operation
Table: Recommended Grinding Wheel Type by Operation
Chamfer Wheel
Shoulder Wheel
1A1
Face Wheel
Common Wheel Types
Available in various sizes and
CBN and Diamond