Cuttermasters Professional JXT - Page 5

www.cuttermasters.com - Toll Free (800) 417 2171
CUTTERMASTER Professional JXT User’s Manual
Page 5
1.3 Journeyman JXT Specications
Air Bearing Stroke 10.5″(266.7mm)
Air Bearing Swing Over Table 9.8″(248.92)
Cutting Tool Capacity 2″shank,9.8″O.D.
Flute Length 10.5″
T-Slot Dimensions 0.8″(20.32mm)x0.5″(12.7mm)x0.67″(17.018mm)
Table Feed Graduations 0.001″(0.02mm)
x-Axis Table Travel 6″(152.4mm)
y-Axis Table Travel 3″(76.2mm)+(76.2mm)
z-Axis Table Travel 3” (76.2mm) from 3.3 to 6.3 inch
x-Axis Table Working Space 16.5″(419.1mm)x5.5″(139.7mm)
y-Axis Table Working Space 3” (76.2mm) from 3.3 to 6.3 inch
Wheel Mount Standard1.25″bore3,4,5.6″cupordishwheel
Motor / Tilt 1/3hp,3450rpmVariableSpeed/InniteTiltAxis
Mount
Control with Torque Compensation Toycen Whisper Drive Input 120/240 AC 60/50 Hz
Output 130-20 V DC
Net Weight 210 lbs (98 Kg)
Gross Weight 232lb (106Kg)
Machine Dimensions Excluding Handwheels 21″x20″x21″
Note: This grinder plugs in to regular household AC current and converts to DC onboard.
1.3 Journeyman JXT Specications