Unpacking Your Cooler
1. Remove all packing material. This includes the foam base and all adhesive tape.
2. Inspect and remove any remains of packing, tape or printed materials before powering on the
cooler.
Leveling Your Cooler
1. There are four leveling legs which are located in the front and rear corners of your cooler. After
properly placing your cooler in its final position, you can level your cooler.
2. Leveling legs can be adjusted by turning them clockwise to raise your cooler or by turning them
counterclockwise to lower your cooler. The cooler door will close easily when the leveling legs are
extended.
PRODUCT PARTS AND FEATURES
1
2
1 Shelves
2 Handle
3
Le
v
eli
ng
le
gs
3
HOW TO OPERATE THE BOTTLE COOLER
1. Insert the power plug into wall outlet.
2. To adjust the temperature turn thermostat knob inside the cabinet.
Temperature Control
The inner temperature ranges from 0└ to 10 ┘.You can turn the
thermostat knob to your desired temperature. Turn the knob clockwise;
the position varies from 1 to 6, (6 being coldest). By turning the position
to 0; you will switch your appliance off. (See fig #1.)
To Next Page
Loading...