EasyManua.ls Logo

CyberData SIP PAGING ADAPTER - Page 50

Default Icon
58 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
RING CENTRAL CONFIGURATION GUIDE: SIP PAGING ADAPTER (SPA)
Doc. 931050B Page 49
Use the following steps to configure the SPA to join multicast paging groups receiving pages
from the CyberData V3.1 Paging Server and Polycom Phones.
1. From the multicast audio sources, identify the multicast IP addresses and port numbers
for each paging group you need to configure on the SPA. This information is located on
the PGROUPS Configuration page of the V3.1 Paging Server’s web interface and
PagingGroupSettings in the V3.1 Paging Server’s autoprovisioning template.
Figure 8-1. V3 Paging Server PGROUPS Configuration

Other manuals for CyberData SIP PAGING ADAPTER