Why does my CyberPower BP36V60ART2U say 'Replace Battery'?
The 'Replace Battery' message on your CyberPower Battery Pack indicates that the battery will soon need replacement due to insufficient runtime. Contact technical support to replace the battery.
What to do if the CyberPower BP36V60ART2U Battery Pack has a battery failure?
If your CyberPower Battery Pack indicates a battery failure, it means the UPS has failed during the Battery Test. First, check the battery connector and battery breaker. If the problem persists, contact technical support to replace the battery.
What to do if my CyberPower Battery Pack is in 'Over Charge'?
If your CyberPower Battery Pack is showing an 'Over Charge' status, it means the battery is being overcharged. Remove the battery connector and check the charger voltage. If the issue continues, contact CyberPower for repair.
How to fix 'BAT Disconnected' error on CyberPower BP36V60ART2U Battery Pack?
The 'BAT Disconnected' error on your CyberPower Battery Pack indicates missing battery power. Check the battery connector and battery breaker.
General| Output power | - W |
|---|---|
| Input frequency | - Hz |
| Maximum current | 60 A |
| Output power capacity | - kVA |
| Input operation voltage (min) | - V |
| Output operation voltage (min) | 36 V |
| AC outlet types | - |
| AC outlets quantity | 10 AC outlet(s) |
| Form factor | Rackmount |
| Certification | UL1778, CSA C22.2 NO.107.3-05, FCC DOC A |
| Product color | Black |
| Rack capacity | 2U |
| Housing material | Steel |
| Hot-swap battery | Yes |
| Battery technology | Sealed Lead Acid (VRLA) |
| Battery recharge time | 5 h |
| Number of battery cells | 6 |
| Typical backup time at half load | - min |
| Battery type | 12V/9AH |
| Operating altitude | 0 - 3000 m |
| Non-operating altitude | 0 - 15000 m |
| Storage temperature (T-T) | -15 - 45 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 0 - 95 % |
| Operating relative humidity (H-H) | 0 - 90 % |
| Sustainability certificates | RoHS |
Weight and Dimensions| Depth | 430 mm |
|---|---|
| Width | 433 mm |
| Height | 88 mm |
| Weight | 22900 g |
| Package weight | 29600 g |
Details the components included with the battery pack for setup and connection.
Lists critical safety warnings for hardware installation procedures.
Provides steps for mounting the battery pack in a rack system.
Instructions for installing the battery pack in a vertical or tower orientation.
General safety warnings regarding installation environment and battery handling.
Identifies and explains the function of each port and control on the battery pack.
Step-by-step guide for connecting a single battery pack to a UPS.
Instructions for connecting multiple battery packs in series to a UPS.
Guide to configuring the UPS for the number of attached battery packs via LCD.
Guidelines for storing the battery packs for extended periods.
Instructions and precautions for replacing batteries.
Information on proper hazardous waste disposal of batteries.
Detailed steps for physically installing new batteries into the pack.
Lists specifications for BP36V60ART2U and BP72V60ART2U models.
Provides solutions for common problems like battery disconnection or failure.
Contact details and procedures for obtaining service or support.
Details what the warranty covers, including defects and connected equipment.
Procedures for obtaining warranty service and making connected equipment claims.
Lists conditions and situations not covered by the warranty.
Excludes liability for use in high-risk or hazardous environments.
Information regarding FCC rules and compliance for the device.
Contact information for technical assistance and product questions.
To Next Page
