15
REMOVING THE COVER FROM THE BOOSTER
Release the four press-studs of the seat cover at the front and the back. Now, pull o
the cover over the armrests and along the seat surface.
Note! Please wash the cover before you use it the rst time. The cover may only
be washed at 30°C with a delicate wash program. Washing at more than 30°C may
result in discolouration of the cover fabric. Please wash the cover separately from
other laundry and do not dry in the dryer! Never dry the cover in direct sunlight! The
plastic parts can be cleaned with a mild cleaning agent and warm water.
WARNING! Never use harsh cleaning agents or bleaches!
CLEANING
• If the vehicle is directly exposed to strong sunlight for long periods, the child seat
must be removed from the vehicle or covered with a light cloth.
• Check all plastic and metal parts of the seat regularly for damage or change of
shape or colour. If you notice any change in the child seat, the child car seat must
be disposed or checked and possibly replaced by the manufacturer.
• Changes to the fabric, especially fading, are normal when used in a vehicle and do
not impair the seat‘s function.
PRODUCT LIFESPAN
WARNING! An accident may cause damage to the child car seat that is not
identifiable with the naked eye. Please replace the seat after an accident. In
case of doubt, please consult your dealer or the manufacturer.
HOW TO ACT FOLLOWING AN ACCIDENT
This car seat has been designed to be able to fulll its intended functions by ordinary
use for a product life span of approx. 9 years.
Gradual wear of the plastic, for example caused by exposure to sunlight (UV), can
cause slight deterioration of the product’s properties.
Since very high temperature uctuations and other unforeseeable stresses are
common in vehicles, it is necessary to observe the following points:
To Next Page
Loading...
