CYBEX 750C Addendum To Manual

Operation
Page 3–8
Cybex 750C/750R Total Access (TA) Addendum
A2 – Isokinetic Program Setup
1. Press Programs key.
2. Scroll to A2.
3. Press Enter to select program.
4. Select time.
5. Use Level + - keys to adjust Revolutions per Minute (RPM). Choices are 15 - 150 in
increments of fi ve.
6. Enter user’s accurate weight.
A3 – Fitness Test Setup
1. Press Programs key.
2. Scroll to A3.
3. Press Enter to select program.
4. Using the number keypad, key in user’s accurate age when Text Area prompts “ENTER YOUR
AGE TO CALCULATE TARGET HEART RATE”. Valid age range is 13 – 113.
5. Enter user’s accurate weight.
6. When the Text Area prompts “CHOOSE MALE/FEMALE”, use the Level + - keys to choose
male or female. Default is set to male.
Before the Fitness Test can run, confi rmation and display of a valid heart rate is required.
If no valid heart rate signal is present, the Text Area will scroll “ACQUIRING VALID HEART RATE
SIGNAL”. If no valid heart rate is acquired, a beep will sound and the unit will reset to Count Down.
If a valid heart rate is present, the unit will move forward to start the Fitness Test. If user’s heart rate is
above 100 BPM, the unit will display the message “THE FITNESS TEST IS ONLY VALID IF STARTING
FROM A STATE OF REST”.

CYBEX 750C Specifications

General

Brand	CYBEX
Model	750C
Category	Exercise Bike
Language	English