CYBEX R Series User Manual

R Series Arc Trainer
Assembly Instructions
Part Number
1008301-0001 AC

CYBEX R Series Specifications

General

Brand	CYBEX
Model	R Series
Category	Exercise Bike
Language	English

Summary

Getting Started

Safety Instructions

General safety guidelines and warnings for using exercise equipment.

Testing Parameters

Accuracy test points for displayed power and speed measurements.

Setup

Choosing and Preparing Site

Criteria for selecting and preparing the exercise equipment location.

Install External Power Supply

Instructions for connecting the external power supply to the unit.

Check for Console Power

Steps to verify the console is receiving power and functioning correctly.

Cable TV Hook Up

Guidelines for connecting CATV service to the console.

Product Overview

Product Features

Identification of key components of the R Series Lower and Total Body models.

How to Use the Arc Trainer

Instructions on how to properly mount, use, and dismount the Arc Trainer.

Assembly

Assembly Procedure - R Series Lower Body

Step-by-step instructions for assembling the R Series Lower Body unit.

Install Console Weldment

Attaching the console weldment to the frame.

Install Cables to Console

Connecting various cables to the console for the 50L and 70T models.

Install Console Cables to Base (Basic Cabling)

Connecting console cables to the base unit using the basic cabling option.

Install Console Cables to Base (Advanced Cabling)

Connecting console cables to the base unit using the advanced cabling option.

Install Accessory Tray Base

Attaching the accessory tray base to the frame.

Install Accessory Tray Top

Attaching the accessory tray top to the base.

Install Accessory Tray Bottom

Attaching the accessory tray bottom to the frame and tray top.

Install Side Handles

Attaching the side handle assemblies to the frame.

Assembly Procedure - R Series Total Body

Step-by-step instructions for assembling the R Series Total Body unit.

Install Rear Covers

Installing the rear covers on the frame for the Total Body.

Remove Left and Right Handle Assembly

Detaching, rotating, and reattaching handle assemblies.

Install Left Linkage Rod

Attaching the left linkage rod to the left arm.

Install Right Linkage Rod

Attaching the right linkage rod to the right arm.

Install Contact Heart Rate Cable

Connecting the handle heart rate cable to the frame.

Install Foot Pads

Placing foot pads under the rear feet to prevent rocking.

Visually Inspect Unit

Level Unit

Procedure to level the unit by adjusting rear feet for stability.

Service and Technical Data

Preventive Maintenance Tips

Recommendations for keeping the CYBEX product operating at peak performance.

Troubleshooting the Polar® Heart Rate Chest Strap

Solutions for erratic or absent heart rate readings from the chest strap.

Troubleshooting the Lifepulse™ System Sensors

Steps to take if Lifepulse system sensor readings are erratic or missing.

Drive Belts

Information about drive belts and their maintenance.

How to Obtain Product Service

Specifications

R Series - Specifications

Technical specifications for the R Series Lower Body and Total Body models.