Assembly
Assembly Procedure - R Series Lower Body
Two people will be required for this procedure.
TIP: Read and understand all instructions thoroughly before assembling this unit. Check all items carefully.
If there is damage, see the Customer Service section of this manual for proper procedure to return, replace,
or reorder parts.
The words "left" and "right" denote the user's orientation.
Verify you have received the correct package
1. Read box label to verify the model number and voltage (optional) match what was ordered.
2. Verify paint color matches what was ordered.
Verify Parts List Shown Below
Components
QuantityDescriptionItem
1Base Assembly1
1Console Assembly2
1Cover, Console Back3
1Weldment, Console4
1Bracket, Lower5
1Base, Accessory Tray6
1Cover, Top, Accessory Tray7
1Cover, Bottom, Accessory Tray8
1Cover, Rear, Top, Right9
1Cover, Rear, Lower, Right10
1Gasket, Rear, Right11
1Cover, Rear, Top, Left12
1Cover, Rear, Lower, Left13
1Gasket, Rear, Left14
2Foot Pad15
1Side Handle, Right16
1Side Handle, Left17
1Assembly Instructions18
1Hardware Pack 119
1Hardware Pack 220
1*Wire Harness21
NOTE: *Cabling varies depending on base and console.
Page 15 of 47
To Next Page
Loading...
Need help?
General
