Operation
Page 3–11
Cybex 750C/750R Total Access (TA) Addendum
Wireless Heart Rate Display – To use this feature, a Polar
®
compatible heart rate transmitter belt (not
included) must be worn.
Once the actual heart rate is determined, the LED to the right of the Text Area is blinking
to the displayed BPM and the Heart LED lights up. The color of the light represents a
scale of low to high target heart rate.
White Valid BPM not yet available
Blue
0
– 69 BPM
Green
70 – 93 BPM
Yellow
94 – 119 BPM (Fat Burn Zone)
Blood Orange
120 – 169 (Cardio Zone)
Magenta 170 and higher
Fan Control
The fan defaults at the “Off” setting. The user can change to “Lo” or “Hi” setting by pressing the
appropriate control key. NOTE: User must be pedalling for fan to operate.
Battery Sentry
Battery Sentry uses display feedback (speed signal, key presses and heart rate) to determine user
presence. If a user is not detected within 20 seconds, the display beeps and inquires
“ARE YOU THERE?”.
Resume pedalling, grab the contact heart rate grips or press any key within a pre-selected time to resume
workout.