CYBEX 8800 Owner's And Service Manual

Product Number 8800/8810 Owner’s Manual
Assembly
Page 4-6
13. Install Chin Up Bar (8810 units only).
Locate Chin Up Bar and hardware.A.
With an assistant, align Chin Up Bar in place.B.
Place a drop of Loctite 242 on BHSCS from hardware bag and threaded holes.C.
Secure Chin Up Bar with hardware from hardware bag.D.
Verify all BHSCS are securely tightened.E.
Carefully slide top weight (removed in step 6J) over guide rods.F.
Insert plugs from hardware bag. G. NOTE: Refer to step 10B for location of plugs.
With an assistant secure Chin-Up Bar in place removed in step 10I.N.
Verify all BHSCS are securely tightened. O.
Insert plugs removed in step 10C for 8800 or from hardware pack for the 8810.P.
11. Install weight plates, decals, cable routing and, shroud assembly for 8800.
Refer to step 6A -9B for weight plates, decals, cable routing, and shroud assembly.A.
12. Separate Frame for 8810 (If needed to fi t thru doorway.)
Remove shipping pallet refer to step 4.A.
Refer to steps 10J-10NB.
14. Install weight plates, decals, cable routing and shroud assembly for 8810.
Refer to step 6A -9B for weight plates, decals, cable routing, and shroud assembly.A.
15. Verify proper operation.

CYBEX 8800 Specifications

General

Brand	CYBEX
Model	8800
Category	Home Gym
Language	English