12
REMOVING THE CYBEX PALLAS 2-FIX
Perform all installation steps in reverse order.
Note!
By following these steps the vehicle’s seat pad will be protected and the
stains could obstruct a smooth operation.
hidden.
SECURING THE CHILD
Note!
or a towel underneath the child seat.
Place the CYBEX Pallas 2-fix on the respective seat in the car.
the backrest of the car seat so that the child seat is under no circumstance in a
sleeping position.
inclination of the vehicle seat.
Warning! The backrest of the CYBEX Pallas 2-fix should rest flat against
backrest of the car seat. Pushing the booster rearwards the seat should be
tightly pressed against the seat. For the best possible protection of your child,
the seat must be in a normal upright position!
To Next Page
Loading...
