SECURING THE CHILD CAR SEAT USING THE ISOFIX CONNECT
SYSTEM
SECURING THE CHILD CAR SEAT USING THE ISOFIX CONNECT
SYSTEM
Using the ISOFIX Connect system, you can x the CYBEX SOLUTION
M-FIX to the vehicle, thereby increasing your child’s safety. The child still
.needs to be secured with the three-point belt of your vehicle
Using the ISOFIX Connect system, you can x the CYBEX SOLUTION
M-FIX to the vehicle, thereby increasing your child’s safety. The child still
.needs to be secured with the three-point belt of your vehicle
• Insert the supplied ISOFIX guides (u) with the longer strap upwards into the
two ISOFIX xture points (j). In some vehicles, it is better to mount the ISOFIX
.guides aids (u) in the opposite direction
• Insert the supplied ISOFIX guides (u) with the longer strap upwards into the
two ISOFIX xture points (j). In some vehicles, it is better to mount the ISOFIX
.guides aids (u) in the opposite direction
•(Use the adjustment lever (v) under the seat cushion (d
•.Pull the two ISOFIX Connect locking arms (o) as far as they will go
• Now twist the ISOFIX Connect locking arms (o) 180° so that they are facing
.(the direction of the ISOFIX guides (u
•(Use the adjustment lever (v) under the seat cushion (d
•.Pull the two ISOFIX Connect locking arms (o) as far as they will go
• Now twist the ISOFIX Connect locking arms (o) 180° so that they are facing
.(the direction of the ISOFIX guides (u
• Push the two locking arms (o) into the ISOFIX guides (u) until these lock into
.’place in the ISOFIX xture points with an audible ‘click
•.(Ensure that the seat is secure by trying to pull it out of the ISOFIX guides (u
• The green safety indicator (b) must now be clearly visible on the two red
.(release buttons (y
• You can now use the adjustment lever (v) on the frame (d) of the CYBEX
.SOLUTION M-FIX child car seat position
• Push the two locking arms (o) into the ISOFIX guides (u) until these lock into
.’place in the ISOFIX xture points with an audible ‘click
•.(Ensure that the seat is secure by trying to pull it out of the ISOFIX guides (u
• The green safety indicator (b) must now be clearly visible on the two red
.(release buttons (y
• You can now use the adjustment lever (v) on the frame (d) of the CYBEX
.SOLUTION M-FIX child car seat position
Note! The ISOFIX xture points (j) are two metallic clips for each seat and are
positioned between the backrest and the seating surface of the vehicle seat. In
.case of doubt, please refer to the driver’s manual of your vehicle
Note! The ISOFIX xture points (j) are two metallic clips for each seat and are
positioned between the backrest and the seating surface of the vehicle seat. In
.case of doubt, please refer to the driver’s manual of your vehicle
.“Note! Note the information in the section “Placing the seat in the vehicle .“Note! Note the information in the section “Placing the seat in the vehicle
Note! Before clicking the the ISOFIX Connect locking arms (o) into the ISOFIX
xture points (j), check the release buttons (y). If the green safety indicators
(b) are visible, you must rst release the ISOFIX Connect locking arms before
joining by pressing and pulling back the release button (y). Repeat the process if
.necessary with the second locking arm
A perceptible click will be heard when the ISOFIX Connect locking arm correctly
.locks into place with the ISOFIX xture points
Note! Before clicking the the ISOFIX Connect locking arms (o) into the ISOFIX
xture points (j), check the release buttons (y). If the green safety indicators
(b) are visible, you must rst release the ISOFIX Connect locking arms before
joining by pressing and pulling back the release button (y). Repeat the process if
.necessary with the second locking arm
A perceptible click will be heard when the ISOFIX Connect locking arm correctly
.locks into place with the ISOFIX xture points
To Next Page
Loading...
