CYBEX SOLUTION M-FIX

63
TRHE
AR
.ACTIVATING THE L.S.P .ACTIVATING THE L.S.P
ADAPTING TO BODY SIZE ADAPTING TO BODY SIZE
REMOVAL OF THE CYBEX SOLUTION M-FIX REMOVAL OF THE CYBEX SOLUTION M-FIX
The “Linear Side-impact Protection” system (L.S.P.) can be extended in two steps
by pressing the L.S.P. button(s).Together with the initial position, this provides a
.total of three different L.S.P. settings
The “Linear Side-impact Protection” system (L.S.P.) can be extended in two steps
by pressing the L.S.P. button(s).Together with the initial position, this provides a
.total of three different L.S.P. settings
.Perform the installation steps in the reverse order .Perform the installation steps in the reverse order
To push the L.S.P. back into the housing, press the L.S.P. button again and push
.the L.S.P. back into the starting position
To push the L.S.P. back into the housing, press the L.S.P. button again and push
.the L.S.P. back into the starting position
• The seat can then be adjusted to your child’s body simply by using the
adjustable headrest (e). To do this, pull the adjustment level (h) upwards to
.(unlock the headrest (e
• Adjust it so that there is space for two ngers between the lower edge of the
.headrest (e) and the shoulder of the child
• The seat can then be adjusted to your child’s body simply by using the
adjustable headrest (e). To do this, pull the adjustment level (h) upwards to
.(unlock the headrest (e
• Adjust it so that there is space for two ngers between the lower edge of the
.headrest (e) and the shoulder of the child
• Unlock the ISOFIX locking arms (o) on both sides by pushing the red
.release buttons (y) and pulling them back simultaneously
•.(Pull the seat out of the ISOFIX guides (u
•.Rotate the locking arms (o) 180°
• Operate the adjustment lever (v) on the frame (d) of the CYBEX
.SOLUTION M-FIX and push the locking arms in as far as they will go
• Unlock the ISOFIX locking arms (o) on both sides by pushing the red
.release buttons (y) and pulling them back simultaneously
•.(Pull the seat out of the ISOFIX guides (u
•.Rotate the locking arms (o) 180°
• Operate the adjustment lever (v) on the frame (d) of the CYBEX
.SOLUTION M-FIX and push the locking arms in as far as they will go
.Note! Always activate the L.S.P. on the side of the seat facing the car door .Note! Always activate the L.S.P. on the side of the seat facing the car door
Note! Only an optimally adjusted headrest (e) can offer your child maximum
protection and comfort while ensuring that the diagonal belt can be tted
smoothly (f). The height of the CYBEX SOLUTION M-FIX can be adjusted to one
.of twelve positions
Note! Only an optimally adjusted headrest (e) can offer your child maximum
protection and comfort while ensuring that the diagonal belt can be tted
smoothly (f). The height of the CYBEX SOLUTION M-FIX can be adjusted to one
.of twelve positions
Note! By folding in the locking arms (o), you are not just protecting the vehicle
seat but also the locking arms of the ISOFIX Connect system from dirt and
.damage
Note! By folding in the locking arms (o), you are not just protecting the vehicle
seat but also the locking arms of the ISOFIX Connect system from dirt and
.damage