CYBEX SOLUTION M-FIX

65
TRHE
AR
PLACING THE SEAT IN THE VEHICLE PLACING THE SEAT IN THE VEHICLE
FASTENING YOUR CHILD’S SEATBELT FASTENING YOUR CHILD’S SEATBELT
.Place the child car seat on the appropriate seat in the car .Place the child car seat on the appropriate seat in the car
Note! On some car seats made of sensitive materials (e.g. suede, leather etc.),
the use of child car seats may leave marks and/or cause discolouration. To
prevent this, you can place a blanket or towel underneath it, for example. Please
also refer in this connection to our cleaning advises in these usage instructions;
these cleaning instructions must be observed prior to using the seat for the rst
.time
Note! On some car seats made of sensitive materials (e.g. suede, leather etc.),
the use of child car seats may leave marks and/or cause discolouration. To
prevent this, you can place a blanket or towel underneath it, for example. Please
also refer in this connection to our cleaning advises in these usage instructions;
these cleaning instructions must be observed prior to using the seat for the rst
.time
• Always ensure that the entire surface of the backrest (a) of the
CYBEX SOLUTION M-FIX is placed fully against the backrest of the
vehicle seat. The child car seat must never be in a lying position. If
necessary, you can adjust the distance using the adjustment lever
.((v
• Always ensure that the entire surface of the backrest (a) of the
CYBEX SOLUTION M-FIX is placed fully against the backrest of the
vehicle seat. The child car seat must never be in a lying position. If
necessary, you can adjust the distance using the adjustment lever
.((v
1 . Place your child in the child car seat. Pull the three-point belt right out and
.feed it along the belt buckle (l) in front of your child
1 . Place your child in the child car seat. Pull the three-point belt right out and
.feed it along the belt buckle (l) in front of your child
2 . Insert the belt tongue (m) into the belt buckle (l). It must lock into place with
.“an audible “CLICK
3 . .Next, place the lap belt (n) in the lower belt guides (k) of the child car seat
4 . Now pull the diagonal belt (f) rmly to tighten the lap belt (n). The tighter the
belt sits, the better it provides protection from injury. On the side of the belt
buckle (l), the diagonal belt (f) and the lap belt (n) must be inserted together
.(in the lower belt guide (k
2 . Insert the belt tongue (m) into the belt buckle (l). It must lock into place with
.“an audible “CLICK
3 . .Next, place the lap belt (n) in the lower belt guides (k) of the child car seat
4 . Now pull the diagonal belt (f) rmly to tighten the lap belt (n). The tighter the
belt sits, the better it provides protection from injury. On the side of the belt
buckle (l), the diagonal belt (f) and the lap belt (n) must be inserted together
.(in the lower belt guide (k
• If the headrest of the vehicle is in the way, pull it out all the way, turn it
away or remove it completely (for exceptions to this, please refer to the section
“POSITIONING THE SEAT CORRECTLY IN THE VEHICLE”) The backrest (a)
.will perfectly adapt to practically any recline of the vehicle seat
• If the headrest of the vehicle is in the way, pull it out all the way, turn it
away or remove it completely (for exceptions to this, please refer to the section
“POSITIONING THE SEAT CORRECTLY IN THE VEHICLE”) The backrest (a)
.will perfectly adapt to practically any recline of the vehicle seat
.Warning! Never twist the belt .Warning! Never twist the belt
Warning! The full surface of the backrest of the CYBEX child car seat must
be against the backrest of the vehicle. To ensure maximum protection for
!your child, the seat must be in a normal upright position
Warning! The full surface of the backrest of the CYBEX child car seat must
be against the backrest of the vehicle. To ensure maximum protection for
!your child, the seat must be in a normal upright position