EasyManua.ls Logo

CYBEX SOLUTION M-FIX - Page 72

CYBEX SOLUTION M-FIX
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
71
TRHE
AR
REMOVING THE SEAT COVER REMOVING THE SEAT COVER
REMOVING THE COVER FROM THE HEADREST FLAP REMOVING THE COVER FROM THE HEADREST FLAP
REMOVING THE COVER FROM THE HEAD SUPPORT REMOVING THE COVER FROM THE HEAD SUPPORT
REMOVING THE COVER FROM THE SHOULDER PART REMOVING THE COVER FROM THE SHOULDER PART
The cover of the infant seat consists of four parts (Headrest ap, headrest,
shoulder part cover, booster cover and/or seat surface cover).This is
.complemented by the safety cushion cover
The four covers of the seat are tted into the cover attachment channels on the
edge of the infant seat and are held in position at several places by press-studs
.((see image
Once all studs have been released, the single parts of the cover can be removed
.from the cover attachment channels
The cover of the infant seat consists of four parts (Headrest ap, headrest,
shoulder part cover, booster cover and/or seat surface cover).This is
.complemented by the safety cushion cover
The four covers of the seat are tted into the cover attachment channels on the
edge of the infant seat and are held in position at several places by press-studs
.((see image
Once all studs have been released, the single parts of the cover can be removed
.from the cover attachment channels
Pull the opening of the cover over the adjustment lever so that the cover does not
.get jammed on the lever when pulling it up to remove it
Pull the opening of the cover over the adjustment lever so that the cover does not
.get jammed on the lever when pulling it up to remove it
Release the two press-studs at each side of the rear of the shoulder area. Pull
.the cover out of the cover attachment channel
Release the two press-studs at each side of the rear of the shoulder area. Pull
.the cover out of the cover attachment channel
.Pull the cover out of the cover attachment channel .Pull the cover out of the cover attachment channel
In order to put the covers back on the seat, proceed in the reversed order as
.removing them
In order to put the covers back on the seat, proceed in the reversed order as
.removing them
.Warning! The child car seat must never be used without the cover .Warning! The child car seat must never be used without the cover

Table of Contents

Other manuals for CYBEX SOLUTION M-FIX

Related product manuals