11
ACTIVATING THE L.S.P.
The “Linear Side-impact Protection” System (L.S.P.) can
be extended fully by pressing the L.S.P. button(s).
There are a total of three different L.S.P. settings.
1. Storage position
2. Half extension
3. Full extension
To push the L.S.P. into the second position once fully
extended press the L.S.P. button and push the L.S.P. into
the housing halfway. Pressing the L.S.P. button again and
pushing the L.S.P. all the way into the housing will put the
L.S.P back into the storage position.
ALWAYS activate the L.S.P. on the side of the seat
directly facing the car door. Do not deploy if used
in the center seating position, or on the side placed
next to another person or Child Restraint.
To Next Page
Loading...
