CYBEX SOLUTION M-FIX - Installation Using LATCH Connectors; Preparing LATCH Connectors

16
The Solution M-x is designed to be used with the vehicle’s
lower LATCH anchors, if available. This booster seat may
also be used in seating positions without lower LATCH
anchors, see page 18.
Step 1
Select a seat location allowed by your vehicle manufacturer
equipped with a THREE POINT LAP AND SHOULDER
BELT system. Locate the lower LATCH anchors or the
symbols indicating their location.
Step 2
If the lower LATCH anchors are hidden behind the crease
between the seat back and seat cushion, install the supplied
LATCH Guides to the lower LATCH anchors for easier
installation of the booster seat.
To install, connect the two LATCH Guides to the two lower
LATCH anchors by sliding the LATCH Guides into the crease
and hook onto the lower LATCH anchor.
INSTALLATION USING LATCH CONNECTORS
DO NOT INSTALL this booster seat using LATCH
if the vehicle belt buckle is located in between the
lower LATCH anchors.
DO NOT INSTALL this booster seat using LATCH
if the vehicle belt is located between the lower
LATCH anchors.