23
REMOVING THE SEAT COVERS
The seat cover consists of ve parts which are xed to the
seat with velcro, press studs or button holes. Once you have
released the fasteners, the cover parts can be removed. To
remove the covers, please follow the instructions below:
1. Undo the snaps on the lower side of the Headrest
cover. Then pull up to remove the cover.
2. Move the Headrest to its highest position.
3. Open and loosen all the snaps on the rear side of the
Headrest cover. Then pull the cover forward.
4. Pull down the cover on the left and right side of the
Shoulder Protectors. Then undo the snaps on the
interior of the shoulder protectors in order to be able to
remove the cover
5. Before you can remove the backrest cover from the
seat, undo the associated fastenings its rear side.
6. Then thread the elastic bands out on the under side of
the seat area, and remove the seat cushion cover.
Before removing the separate parts of the seat cover,
please ensure that the cover is already positioned above
the decorative silver parts. To put the covers back on the
seat, proceed as above in reverse order.
REINSTALLING THE SEAT COVERS
To install the seat covers, follow the removal instructions
above in reverse.
FABRIC COVERS
To Next Page
Loading...
