7
FIRST INSTALLATION
ADJUSTMENT REGARDING THE CHILD‘S HEIGHT
ADJUSTMENT OF THE HEADREST
Warning! The parts of the CYBEX Solution X-fix must not be used alone
or in combination with boosters, backrests or headrests from other
manufacturers or of a different product series. In such cases, the
certification expires immediately.
The child seat consists of a booster seat (d) and a backrest (a) with height
adjustable shoulder and headrest. Only the combination of both parts
provides best protection and comfort to your child.
Warning! Please make sure that the plastic parts of the child seat never
get jammed (e.g. in the car door or by adjusting the back seat).
Connect the backrest (a) to the booster (d) by hooking the guide lug (b)
on the axis (c) of the booster (d).
A headrest can only provide the best protection and comfort for your
child if optimally adjusted. Only then it can guarantee the optimal
position of the diagonal belt (f). You can adjust the height of the Solution
X-x headrest (e) in 11 positions. The shoulder rest is attached to the
headrest and does not have to be adjusted separately. You can check
the optimal adjustment of the headrest by trying to t exactly two ngers
between the headrest and the shoulders of the child.
• Place your child in the child seat.
• Pull the adjustment handle (h) in order to unlock the shoulder and headrest.
• Bring the shoulder and headrest (e) in the desired position.
• As soon as you let go of the adjustment handle (h), the shoulder and
headrest (e) locks automatically.
Note! Please keep the instruction manual close by for future reference
(e.g. by storing it under the elastic cover at the rear side of the backrest.)
e
f
e
h
d
a
a
b
c
d
To Next Page
Loading...
Need help?
General
