To Next PageTo Next Page
Need help?Do you have a question about the CycleOps Club Pro 300PT and is the answer not in the manual?
General| Flywheel Weight | 48 lbs |
|---|---|
| Power Measurement | Yes |
| Weight Capacity | 300 lbs |
| Display Type | LCD |
| Warranty | 1 Year |
| Bike Type | Indoor Cycle |
| Adjustable Seat | Yes |
| Connectivity | ANT+ |
Attaching the front and rear stabilizer feet to the indoor cycle frame using bolts and washers.
Installing the handlebar post and handlebar onto the head tube, securing with pinch bolt and quick-release lever.
Mounting the saddle clamp assembly onto the seat tube and attaching the saddle to the clamp.
Installing the right and left pedals onto the crank arms, noting thread direction differences.
Securing the console bracket to the handlebars and attaching the console to the bracket.
Adjusting the leveling feet underneath the stabilizers to ensure the bike is stable and does not rock.
Tensioning the chain and aligning the flywheel in the frame by adjusting acorn nuts and axle locking nuts.
Changing the AA batteries in the Club Pro 300PT flywheel or E90 batteries for wired consoles.
Aligning brake pads parallel to the flywheel and adjusting cable tension for proper braking.
Replacing worn brake pads by loosening bolts, removing old pads, and installing new ones.
Replacing the resistance knob by removing the water bottle holder and adjusting the cable stop.
Lubricating the chain every six months using a Teflon-based lubricant via the lubrication port.
Applying lithium grease to hardware threads like stabilizer bolts, feet, pull-pins, and pedal spindles.
