CycleOps Joule - SENSORS & PAIRING

CHAPTER 2: JOULE GPS OVERVIEW & SETUP
SENSORS & PAIRING
Pairing is a term used to describe the association of your Joule GPS with a particular sensor that is
broadcasting an ANT+ signal (e.g. a PowerTap hub, a Heart Rate strap, a remote cadence sensor, a remote
speed sensor, etc.). Sensors can be shared between bikes (e.g. a heart rate strap). Each User can define
multiple bikes. Each bike may have one or more sensors associated with it.
Main Menu
Ride
History
Sensors
Training
Navigation
User
Device
Back to Dashboard
9:34A 71º
Sensors
Select a Sensor
NEW BIKE
Add a Bike
Back to Main Menu
9:34A
INT
FROM MAIN MENU
[ENTER]
Press
to scroll to Sensors.
Press
ADDING SENSORS & PAIRING Multiple
bikes can be paired with unique names. (e.g.: Jim’s
Racing Bike, Jim’s Mountain Bike, etc.). To add
another bike, select Add a Bike, enter a unique
name and the weight of the bike. Next, select a
sensor to add, make sure the sensor is awake and
broadcasting; select Start Pairing. Under Sensor ID
”Pairing” will flash until the ID is found and
displayed. Select Activate Sensor and return to the
Bike screen to define another sensor.
Name
Weight, lb
Power Sensor
Cadence Sensor
Speed/Combo
Heart Rate Sensor
RU Sensor
Joule GPS User Guide page 9
12” or 30cm
TIP: The Joule pairs to sensor(s) closest to the
device first. Hold the Joule within 12” of PowerTap
hub when pairing in the presence of other sensors.
other sensors