3
1.5 Detaching your Bike from the Trainer
Pull the yellow cam lever down and rotate 90 de-
grees clockwise to unlatch the resistance unit. Pivot
the resistance unit down to allow clearance for your
rear wheel. Latch the resistance unit by rotating the
cam lever 90 degrees counter clockwise and pushing
up.
Hold your bike by the seatpost. Rotate the yellow
skewer clamp knob counter clockwise to release
your bike.
1.4: Attaching the CycleOps PowerBeam
TM
Pro com-
puter to your Bike
Attach the CycleOps PowerBeam
TM
Pro computer to
your bike by placing the bracket over the handle-
bars as shown below. Attach the straps to secure the
bracket to the handlebars.
The CycleOps Powerbeam
TM
Pro computer can be re-
moved from the bracket by pushing it forward. Install
the optional screw to the underside of the bracket to
create a more permanent attachment.
To Next Page
Loading...
Need help?
General
