CycleOps PowerTap SL+ User Manual

COMPUTER SETUP 2 (SLC+, SL+, Pro+ and 2.4+ only)
This setup menu includes: rate of display for watts, speed, and cadence. NOTE: You are unable to
move back to previously viewed settings. You must restart setup 2 to make corrections. NOTE:
These settings do not effect the data stored for download.
This function can be used to allow better pacing during time trial efforts. A greater rate of dis-
play allows for a slower update of the display.
1) From the computer setup main menu press [SELECT] and scroll until the
number two (2) is flashing and press [MODE] to enter setup mode.
2) Press [SELECT] to toggle through (1, 2, 3, 5 10, 30) rate of display values in
seconds for watts. Press [MODE] to save.
3) Pre
ss [SELECT] to toggle between (1, 2, 3, 5 10, 30) rate of display values
in seconds for speed. Press [MODE] to save.
4) Press [SELECT] to toggle between (1, 2, 3, 5 10, 30) rate of display values
in seconds for cadence. Press [MODE] to save.
6) Press [SELECT] then [MODE] to reset default settings. Press [MODE] to
save changes.
27
PRO
2
2
AV WATTS
PRO
2
3
AV MI
PRO
2
5
C AV
Set
E
1 2 345
t
d

CycleOps PowerTap SL+ Specifications

General

Brand	CycleOps
Model	PowerTap SL+
Category	Measuring Instruments
Language	English