CycleOps SuperMagneto User Manual

4
1.2: Trainer Setup
To set your trainer up, extend the legs as shown be-
low, then set the trainer on a fl at surface.
Turn the thumb wheel to adjust the leg and level the
frame as shown below.
1.3: Attaching your Bike to the Trainer
The CycleOps SuperMagneto
TM
Pro trainer is de-
signed to be used with the provided skewer. Replace
the skewer on the rear wheel of your bike with the
one provided. Make sure the quick release handle is
on the left side of the bicycle and faces upward.
Rotate the yellow skewer clamp knob clockwise to
allow suffi cient clearance for your skewer.
Press
Extend

CycleOps SuperMagneto Specifications

General

Brand	CycleOps
Model	SuperMagneto
Category	Fitness Equipment
Language	English