then press the trigger of this Device all the way so that the dust or dirt of the
nozzle inside will be removed.
13 If this Device is not in use, please unplug the hose away from the air-inlet of his
Device.
Troubleshooting
How to make the water spray fluently when the nozzle can’t spray water.
1 Please check if the BUSHING is blocked by dirt.
2 Please turn on the AIR REVERSE SWITCH ASS'Y. And connect air compressor.
3 Please using the DUSTER to plug up the ALUMINUM TUBE of Cleaning Gun and
holding it tightly.
To Next Page
Loading...