Cycplus AS2 Pro - Product Setup and Details; Packing List and Components; Air Nozzle Adaptation Guide

Type-C
Charging
Po
Nozzle
Power Button
+ Button
- Button
LED Screen
Pressure Value
Pressure Unit
Batte level
Inator Silicone Case Seal Pa
Pillar
Cable
Hose
Packing List
Air Nozzle Adaptation
Details
Presta Valve
Conveer
Ball Needle
Use with the Hose
For Ball Valve
For Presta Valve
For Schrader Valve
The inator is ready for Presta valve right out of the box. For Schrader
valve, please adjust the nozzle accordingly. The hose can be directly
connected and used, regardless of the presence of pillar in the nozzle.
When the target air pressure is above 100 PSI, please use with the hose to
prevent air leakage from the nozzle.
For Valve, the pillar.Presta remove
or Valve, the pillar.F Schrader install
Use Directly
Reverse
Small hole outward
Big hole outward
For Schrader Valve
For Presta Valve
EN
02
Waterproof Bag