Cyetus KCB Series User Manual

Coffee without crema. The coffee beans are
damp or the coffee
powder is too coarse.
Choose fresh coffee
beans and powder with
moderate grinding
setting to make coffee.
No steam. The machine is not
preheated when the
steam function is
performed.
The steam nozzle is
blocked.
The machine can only
produce steam after the
machine is preheated in
steam mode; the
machine needs to be
descaled and use a
cleaning needle to clean
the steam nozzle.
No coffee comes out
from portafilter, or
coffee does not come
out from portafilter
smoothly, or the
portafilter cannot be
installed in portafilter
bracket properly.
Excessive amount of
coffee powder, the
coffee powder is too fine
or the pressure for
tamping coffee powder
is too large.
The amount of powder
should not exceed the
standard amount. Adjust
the grinding setting of
the grinder appropriately
until it is suitable. It
should not be pressed
repeatedly with exces-
sive force when tamping
the coffee powder.
The machine can not
make coffee or hot
water immediately after
the steam comes out
and the machine will
pump water automati-
cally.
After steaming is
completed, the pressure
needs to be released to
reduce the temperature.
At this time, other
operations cannot be
performed.The water
pumping is used for
cooling down the
heating element quickly.
It takes 20-30s to
release the pressure and
cool down. After the
pressure is released and
the cooling down is
finished, the indicators
on the control panel will
work properly, then you
can make coffee and hot
water normally.
- 27 -

Cyetus KCB Series Specifications

General

Brand	Cyetus
Model	KCB Series
Category	Coffee Maker
Language	English