Steam preheating and steam function:
In standby mode, turn the knob to steam position “ ”. The machine enters into
steam mode.at this time, Steam/hot water indicator light will flash, and“ ” 、
“ ” 、“ ” indicators turn off, other indicator lights are unchanged.
Brew double-cup of coffee:
In the standby mode, install the double-cup filter into the portafilter, load about 19
grams of coffee powder, use the coffee tamper and press the coffee powder with a
force of about 12.5Kg, then align the portafilter to the portafilter bracket, turn the
portafilter counterclockwise to lock it. Put a coffee cup on the drip plate, press “ ”
button, the indicator of “ ” button flashes and “ ”、 “ ” indicators turn
off, and the machine starts to brew double-cup of coffee. When the set coffee dose
is reached (about 60ML), the machine will stop working automatically, all the indica-
tors except “ ” and “ ” will light solidly, and the appliance will enter into
the standby mode.
Boil hot water:
In standby mode, turn the knob to hot water position “ ”, the machine enter into
hot water mode, at this time, Steam/hot water indicator light will flash, and “ ”
indicators turn off, other indicator lights are unchanged. Turn the knob to “ ”
position , the machine stops brewing hot water. The machine enters into standby
mode.
- 8 -
NOTE:
The maximum water output of hot water function is 190-240ml, it’s important
to use big enough container to collect the hot water or there must be some-
one to guard it when in use. After hot water function is finished, please turn
the knob to the twelve o'clock position in time; if not, the hot water indicator
will flash as an alarm.
The steam function will generate high temperature steam, please pay
attention to avoid scalding when using it;
•
NOTE:
To Next Page
Loading...
Need help?
General