Cygnus 3 - Resolution Setting

M4-CYG3-M-ENG_Iss2.doc
Cygnus 3 Operating Manual
29
Resolution Setting
The Gauge can display the thickness measurements in two
resolutions:
• High Resolution : 0.05 mm / 0.002 inch
• Low Resolution : 0.1 mm / 0.005 inch
To change the Resolution setting:
1.
Press the MENU key to display
the MAIN MENU
2.
Scroll down to GAUGE SETUP
then press OK
3.
Scroll down to RESOLUTION
4.
Press the EDIT key to change
the RESOLUTION setting:
High to Low
Low to High