Cygnus 3 Operating Manual
M4-CYG3-M-ENG_Iss2.doc
30
The gauge will automatically go
back to the measuring screen.
Minimum Thickness Alarm Function.
The Gauge has a Minimum Thickness Alarm function that can be
used to alert the operator when the measured thickness value is
less than the set minimum value.
The Gauge will alert the operator with a
triple ‘beep’, light the RED Led, display the
thickness value in a black box and display a
MINIMUM ALARM message at the top of the
screen
To turn the Alarm function on or off:
Press the MENU key to display
Scroll down to GAUGE SETUP
To Next Page
Loading...