Need help?Do you have a question about the CYP AU-A50 and is the answer not in the manual?
Describes controls and indicators on the front of the amplifier.
Details all input and output connectors on the rear panel.
Specifies pinout for RS-232 serial communication.
Details pin configuration for IR remote cable.
Explains functions of buttons on the remote control unit.
Outlines options available in the on-screen display menu.
Lists commands for remote control via Telnet or RS-232.
Guide on how to establish and use Telnet connection.
Instructions for controlling the device via its web interface.
Describes controls and indicators on the front of the amplifier.
Details all input and output connectors on the rear panel.
Specifies pinout for RS-232 serial communication.
Details pin configuration for IR remote cable.
Explains functions of buttons on the remote control unit.
Outlines options available in the on-screen display menu.
Lists commands for remote control via Telnet or RS-232.
Guide on how to establish and use Telnet connection.
Instructions for controlling the device via its web interface.
General| Channels | 2 |
|---|---|
| Frequency Response | 20Hz - 20kHz |
| Input Impedance | 47kΩ |
| Impedance | 8Ω |
| Audio Inputs | RCA |
| Audio Output | Speaker terminals |
| Power Supply | AC 220-240V, 50/60Hz |
To Next Page
